Key takeaways
- Debt yield is net operating income divided by the loan amount. A $1,300,000 NOI on a $14,000,000 loan is a 9.3% debt yield.
- Lenders use it because it ignores interest rate and amortization. The same loan can look safe on DSCR and thin on debt yield when rates are low.
- Flip the formula to size a loan: NOI divided by the lender's minimum debt yield is the most they will lend on that income.
- DSCR measures the same risk from the other side (NOI over annual debt service) and moves with every rate change. Lenders check both; the lower loan wins.
- Debt yield equals cap rate divided by LTV, which is why it tells you the loan's exposure to a shift in valuations.
What debt yield is
Debt yield is a property’s net operating income divided by the loan amount, expressed as a percentage. Lenders use it to measure how much income backs every dollar they lend. It answers a blunt question: if we had to take this building back tomorrow, what return would its NOI pay on the money we have out?
A 9.3% debt yield means the property’s NOI is 9.3% of the loan balance. Neither the interest rate nor the amortization schedule changes that number, which is the point.
You’ll see the term in CMBS, bank and debt fund term sheets, and in any credit memo that has to survive a rate shock. If you’re on the acquisitions side, you’ll meet it the first time a lender tells you the loan is smaller than your model assumed.
The debt yield formula
Debt yield = Net operating income / Loan amount
Use underwritten NOI, after normalization, with a market management fee and reserves if the lender insists (most do). Use the full loan amount, including any future funding the lender commits to. The result is a percentage.
To size a loan instead, rearrange:
Maximum loan = Net operating income / Minimum debt yield
Those two lines are the whole method. The rest of this guide is about why lenders care, what numbers they quote, and how to use the formula before a lender does it for you.
Why lenders use debt yield
Interest rate and amortization are terms the lender sets. NOI and the loan amount aren’t. Debt yield measures the loan on the property’s income alone.
That matters most when rates are low. At a 4.5% interest rate on a 30-year schedule, annual debt service on $14,000,000 is about $851,000, and a $1,300,000 NOI covers it 1.53 times. A lender using DSCR alone would be comfortable going to roughly $17,100,000 at a 1.25x minimum. Debt yield at a 9% floor caps the same loan at $14,444,444, no matter how cheap the money is.
So debt yield is the brake on leverage when cheap debt makes every deal look coverable. It also shows the lender how far values can fall before the loan is underwater: a 9% debt yield on a property bought at a 6.5% cap rate means the loan is 72% of value, and the property would have to be worth less than the loan (an implied cap rate above 9%) before the collateral stops covering it.
What debt yield do lenders look for?
There's no single published number. Many lenders look for a floor somewhere around 8% to 10% on stabilized assets, with the lower end for multifamily in strong markets and the higher end for hotels and anything with lease-up risk.
Ask the lender for the floor before you model the deal. It takes one question, and it changes the equity check by millions.
Worked example: a $14,000,000 loan
Take a stabilized asset with a normalized NOI of $1,300,000 and a proposed loan of $14,000,000.
Debt yield = $1,300,000 / $14,000,000 = 9.29%, call it 9.3%.
If the lender's floor is 9%, the loan clears. Now flip it to see how much room there is.
Maximum loan at 9% = $1,300,000 / 0.09 = $14,444,444.
The lender could go about $444,000 higher on this metric. At a 10% floor, the maximum drops to $13,000,000, and the proposed loan is $1,000,000 too big. A single percentage point in the floor moves the loan by more than $1,400,000. That sensitivity is the reason to find out the floor early.
Debt yield vs DSCR
DSCR (debt service coverage ratio) is net operating income divided by annual debt service, where debt service is the year's principal and interest payments.
DSCR = Net operating income / Annual debt service
Run the same deal at a 6.5% interest rate with 30-year amortization. Annual debt service on $14,000,000 is about $1,061,900.
DSCR = $1,300,000 / $1,061,900 = 1.22x.
Most lenders want at least 1.20x to 1.25x on stabilized assets, so this deal is tight on coverage. At a 1.25x minimum, the loan would have to come down to about $13,700,000. On the same deal, debt yield allowed $14,444,444. Here DSCR is the stricter test and sets the loan.
Change one input and the answer flips. Make the loan interest-only at the same rate and debt service falls to $910,000, DSCR rises to 1.43x, and coverage stops being the problem. Debt yield is still 9.3%, because nothing in it moved.
That is why lenders check both. DSCR tells them whether the property can make the payments on this loan at these terms. Debt yield tells them how exposed they are to the asset regardless of terms. The loan is sized to whichever test produces the smaller number.
Debt yield vs cap rate vs LTV
The three are linked by one identity:
Debt yield = Cap rate / LTV
A property bought at $20,000,000 with a $1,300,000 NOI has a 6.5% going-in cap rate. A $14,000,000 loan is 70% LTV. 6.5% divided by 0.70 is 9.29%, the same debt yield we calculated from NOI and loan amount.
The identity is useful in two directions. If a lender quotes a 9% debt yield floor and your deal is a 5.5% cap, the most leverage you'll get is 5.5% / 9% = 61% LTV, before anyone opens a spreadsheet. And when cap rates compress, debt yield floors are what keep loan-to-value from climbing with them: a 4.5% cap at a 9% floor is 50% LTV, however much the lender likes the sponsor.
How an acquisitions analyst uses debt yield
The lender will size the loan to the NOI they underwrite, which is almost always lower than the broker's. Your job before the LOI is to guess that number well enough that the equity check doesn't surprise anyone at committee.
Take the 120-unit multifamily from our T12 guide. The broker's trailing NOI is $1,116,400. After stripping a one-time roof repair, adding $300 a unit in reserves and re-taxing at the post-sale assessment, underwritten NOI is $1,022,400. Pricing guidance is $19,500,000.
At a 9% debt yield floor, the lender's maximum loan is $1,022,400 / 0.09 = $11,360,000, which is 58% of the asking price. On the broker's NOI it would have been $12,404,444, or 64%.
So the equity requirement is about $8,140,000, around $1,040,000 more than a model built on the broker's NOI would show. Run that math on the first read and you'll know whether the deal fits your capital stack before the broker call. Our guide on how to underwrite a commercial real estate deal shows where this check fits in the first screen.
A debt yield calculator
The calculator on this page takes three inputs and returns two answers.
Inputs: net operating income, proposed loan amount, and the lender's minimum debt yield.
Outputs: the debt yield on the proposed loan, and the maximum loan that NOI supports at the minimum. The difference between the two loan figures is your headroom, or your shortfall.
Enter $1,300,000, $14,000,000 and 9% and you’ll get 9.3% and $14,444,444. Enter the 120-unit numbers ($1,022,400, $12,400,000, 9%) and you’ll see 8.2% and a shortfall of about $1,040,000, which is the conversation to have with your lender before anyone else has it with you.
A second block adds interest rate and amortization so you can see DSCR next to debt yield on the same loan. Download the Excel version if you'd rather keep it in your own model.
What Altrio does with the inputs
When a broker emails the OM and T12, Altrio extracts the data from both, including NOI and asking price, so the inputs for a debt yield check are already in the deal record. Lending teams run the same check from the other side of the table.
Altrio files NOI and asking price from the broker's documents into one deal record, so the sizing check is ready when the deal lands. $49 per user per month, 30-day trial, no card needed. Start free
Download Altrio Debt Yield Calculator
Frequently asked questions
What is a good debt yield?
It depends on the lender and the asset. Many lenders look for a floor around 8% to 10% on stabilized properties, with multifamily often at the lower end and riskier property types higher. Agency and CMBS programs publish their own minimums. Ask for the floor before you model the deal.
Is a higher debt yield better?
For the lender, yes. A higher debt yield means more income per dollar of loan and more cushion if values fall. For the borrower it means less leverage on the same NOI, so a higher debt yield usually means a bigger equity check.
Why do lenders use debt yield instead of DSCR?
They use both. DSCR depends on the rate and amortization, so it can look healthy on a cheap loan that's still too large relative to the asset's income. Debt yield strips those terms out and shows the lender's exposure to the property alone.
How is debt yield different from cap rate?
Cap rate is NOI divided by the property's price or value. Debt yield is NOI divided by the loan. The two are linked: debt yield equals cap rate divided by LTV. At 100% LTV they would be the same number.
Does debt yield include amortization or interest rate?
No. That's the reason lenders use it. DSCR depends on both; debt yield depends only on NOI and the loan balance, so it doesn't improve when rates fall or when a loan goes interest-only.
How do I calculate the maximum loan from debt yield?
Divide the underwritten NOI by the lender's minimum debt yield. An NOI of $1,300,000 at a 9% floor supports a loan of $14,444,444. At a 10% floor the same NOI supports $13,000,000.
